cmxDS

In our never ending quest to seek out, lighter, better, faster and of course more horsepower; we have made yet another significant improvement to our already awesome CRAZY MOUNTAIN XTREME DRIVE SYSTEM (CMXDS). We now will offer all belt drive systems (standard equipment on CMX sleds) with a new belt exclusive to CMX from Gates, that is 40% stronger than the belts that we have used up until now.

Crazy Mountain Motorsports Inc. was the first to offer a belt drive system as standard equipment on a snowmobile as well as in kit form, for installation on Polaris, Arctic Cat, Ski-Doo and Yamaha as an upgrade to the old heavy chain case drive system. The XDS is 10 to 12 lbs lighter than a typical chain case system and significantly lighter than the direct drive systems that are on the market. For the ultimate in power transfer, the obvious choice is the CMXDS. Suggested retail $2350.00 Std. 8.5” $2400.00 Longer 10.5”.

Advantages

* XDS is 10-12 pounds lighter than conventional drive systems
* XDS is more efficient at transferring horsepower to the track.
("Seat-of-the-pants noticeable!")
* XDS is longer than conventional drive systems. While jack shaft stays in stock location (optional) track shaft is rolled down and back. Our standard center to center distance is 8.5” and we have a new kit that will be just under 10.5”
Improves the attack angle and creates more clearance from tunnel to bulkhead area.
* The 36mm Gates Poly Chain® W/Carbon Fiber Cords belt will outlast most chains
* Braking is improved with a four piston hydraulic caliper. (new design)
* The brake system acts on the lower (track) drive shaft.

CMXDS for Dragon

dragonkitNow more than ever, is the best time to buy a new CMX. What we have to offer this season is the Lightest, Best Performing & Most Reliable package to date. We are very excited about the CMXDS for the Dragon. Click HERE to see a short video on what our upgrade will do for you!




CMXds Spec's

* 36mm Gates Poly Chain® GT® belt
(40% stronger).
* 2.30, 2.23, 2.14, 2.07, 2.00, 1.93, and 1.86 drive ratios available.
* Hard Anodized Aluminum Sprockets.
* Jack Shaft is Gun Drilled Chrome Molly.
* Track Shaft is 7075 T-6 Aluminum.
* Included in Kit: Jackshaft, Trackshaft, Templates to Locate Drive System, Titanium Bolts, Complete Brake System, All Bearings and Hardware and Installation Instructions. (Drivers Optional)

Availability

* Standard on all CMX sleds.
* Kits available for Polaris, Ski-Doo, Arctic Cat, and Yamaha.

Poly Chain® and Poly Chain®GT® are registered trademarks of Gates Corporation.

(Note: These are not 'bolt-on' kits. Some modification required. Click on the picture to see the instruction manual.

      
Click HERE to see a short video on what our upgrade will do for you!